Accurate simulation of nuclear thermal propulsion systems using computational methods will permit reductions in testing and, thus, the time and cost of achieving a flight ready status for systems utilizing this advanced technology. An accurate simulation must maintain a "balance-ofplant" where the required pump work equals the supplied turbine work. This turbopump assembly balancing must be integrated into the overall system analysis models. TPA was developed to balance turbine and pump work using performance maps. It requires the inlet properties, performance maps, and shaft speed. TPA then computes the exit conditions and work terms. The work terms can then be balanced by varying the input shaft speed.
The objective of the pump analysis is to determine the propellant state properties at the pump exit and the pump work. The pump analysis algorithm for liquid flow assumes that the shaft speed, the propellant state properties at the pump entrance, the propellant flow rate, the pump entrance and exit areas, as well as performance curves, are all known. The analysis of both the pump pressure rise and pump efficiency curves is required.
The objective of the turbine analysis is to determine the propellant state properties at the turbine exit and the turbine work. The turbine analysis algorithm assumes that the shaft speed, the propellant state properties at the turbine entrance, the propellant flow rate, the turbine root mean square blade diameter, the turbine entrance and exit areas, as well as performance curves, are all known. The analysis also requires the turbine flow parameter curve and the turbine total efficiency curve.
TPA is written in FORTRAN 77 to be machine independent. The TPA package includes the NBS+_PH2 code, which is also available separately (LEW15505). TPA has been successfully implemented on a DEC VAX series computer running VMS, a Sun4 series computer running SunOS, and an IBM PC compatible computer running MS-DOS. Lahey F77L3 EM/32 v. 5.01 or higher is required for compilation on an IBM PC compatible computer; however, a PC executable is included in the distribution file. TPA was developed in 1993.
TPA carries the NASA case number LEW-15712. It was originally released as part of the NASA COSMIC collection.
SOURCE CODE AVAILABLE