|
|
|
Foundation ::
Engineering Applications ::
PYROLASER
|
PYROLASER
Pyrolaser Optical Pyrometer Operating System
|
 |
|
SOURCE CODE AVAILABLE
|
|
The PYROLASER package is an operating system for the Pyrometer Instrument Company's Pyrolaser. There are 6 individual programs in the PYROLASER package: two main programs, two lower level subprograms, and two programs which, although independent, function predominantly as macros. The package provides a quick and easy way to setup, control, and program a standard Pyrolaser. Temperature and emissivity measurements may be either collected as if the Pyrolaser were in the manual operations mode, or displayed on real time strip charts and stored in standard spreadsheet format for post-test analysis. A shell is supplied to allow macros, which are test-specific, to be easily added to the system.
The Pyrolaser Simple Operation program provides full on-screen remote operation capabilities, thus allowing the user to operate the Pyrolaser from the computer just as it would be operated manually. The Pyrolaser Simple Operation program also allows the use of "quick starts". Quick starts provide an easy way to permit routines to be used as setup macros for specific applications or tests. The specific procedures required for a test may be ordered in a sequence structure and then the sequence structure can be started with a simple button in the cluster structure provided.
One quick start macro is provided for continuous Pyrolaser operation. A subprogram, Display Continuous Pyr Data, is used to display and store the resulting data output. Using this macro, the system is set up for continuous operation and the subprogram is called to display the data in real time on strip charts. The data is simultaneously stored in a spreadsheet format. The resulting spreadsheet file can be opened in any one of a number of commercially available spreadsheet programs.
The Read Continuous Pyrometer program is provided as a continuously run subprogram for incorporation of the Pyrolaser software into a process control or feedback control scheme in a multi-component system. The program requires the Pyrolaser to be set up using the Pyrometer String Transfer macro. It requires no inputs and provides temperature and emissivity as outputs. The Read Continuous Pyrometer program can be run continuously and the data can be sampled as often or as seldom as updates of temperature and emissivity are required.
PYROLASER carries the NASA case number MFS-28819. It was originally released as part of the COSMIC collection.
|
|
More software from National Technology Transfer Center
|
|
|
|
|
|
|
Open Channel Software runs entirely on Open Source Software. We return
value to the Software community in the form of
services and original software. Most of our
content is currently available as source code, with the
copyright owned by the original author, All
Rights Reserved. Everything else is Copyright
©2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 Open Channel Software.
View our privacy statement.
Contact webmaster at openchannelsoftware dot org with questions.
|
|
|
