Open Channel Foundation
Not Logged In |  | 
Open Channel Foundation


Quick Application Search:


Axial Flow Turbine Software
Get this title!
¤ 
Get Axial Flow Turbine Software
¤ 
Monitor new releases


Basic information
¤ 
Contributors


Foundation :: Engineering Applications :: Axial Flow Turbine Software

Axial Flow Turbine Software

Preliminary Design Analysis of Axial Flow Turbines

engine graphic Moderators:
Adopt This Application!

source code available SOURCE CODE AVAILABLE

A computer program has been developed for the preliminary design analysis of axial-flow turbines. Rapid approximate generalized procedures requiring minimum input are used to provide turbine overall geometry and performance adequate for screening studies.

The computations are based on mean-diameter flow properties and a stage-average velocity diagram. Gas properties are assumed constant throughout the turbine. For any given turbine, all stages, except the first, are specified to have the same shape velocity diagram. The first stage differs only in the value of inlet flow angle. The velocity diagram shape depends upon the stage work factor value and the specified type of velocity diagram. Velocity diagrams can be specified as symmetrical, zero exit swirl, or impulse; or by inputting stage swirl split. Exit turning vanes can be included in the design.

The 1991 update includes a generalized velocity diagram, a more flexible meanline path, a reheat model, a radial component of velocity, and a computation of free-vortex hub and tip velocity diagrams. Also, a loss-coefficient calibration was performed to provide recommended values for airbreathing engine turbines.

Input design requirements include power or pressure ratio, mass flow rate, inlet temperature and pressure, and rotative speed. The design variables include inlet and exit diameters, stator angle or exit radius ratio, and number of stages. Gas properties are input as gas constant, specific heat ratio, and viscosity. The program output includes inlet and exit annulus dimensions, exit temperature and pressure, total and static efficiencies, flow angles, blading angles, and last stage absolute and relative Mach numbers.


This program carries the NASA case number LEW-11815. It was originally released as part of the NASA COSMIC collection.
   More software from National Technology Transfer Center


Open Channel Software runs entirely on Open Source Software. We return value to the Software community in the form of services and original software. Most of our content is currently available as source code, with the copyright owned by the original author, All Rights Reserved. Everything else is Copyright ©2000 - 2014 Open Channel Software.
Free SSL Certificate
View our privacy statement.
Contact webmaster at openchannelsoftware dot org with questions.